Airlive WMM-3000PCM Bedienungsanleitung

WMM-3000PCM/PCI MIMO-G Wireless LAN Adapter User’s Manual

4. If your operation system belong to Windows XP and have update to SP1, click the right button on the icon. You will see the frame below. If you wan

3-2 Configure MIMO WIRELESS LAN Card with Zero Configure After installing MIMO Wireless LAN Card, the Windows XP will display a “WIRELESS Network Con

2. Click Properties to continue 3. Click WIRELESS Networks to reconfigure the WIRELESS network connection. 4. If you need a key(WEP) to connect t

Note: Under the Windows XP, it is recommend to use the “Automatic WIRELESS NetworkConfiguration” to configure your MIMO-G WIRELESS LAN Card. Th

Chapter 4 Configure with “AirLive MIMO Wireless Utility” for Windows 98/ME/2000/XP 4-1 Site Survey Page 1. the means of item z SSID : Name

2. The connected AP z the system will choose the suitable AP when you start up utility in the first time z if you want to connect with another A

1. Profile Name: Different AP can be set up into different Profile Name 2. SSID: The drop-down menu can select which AP is detected by system 3. P

4-2 Authentication & Security As shown in picture . When the Encryption feature is enabled, the other setups are same as the said WEP setting.

iii. ASCII、40bits：5 ASCII characters. iv. ASCII、128bits：13 ASCII characters. 4-2-1 802.1x Setting 802.1x is a authentication for 『WPA』and 『WPA

encrypted channel. Unlike EAP-TLS, EAP-TTLS requires only server-side certificates. iv. LEAP: Light Extensible Authentication Protocol. It is an EAP

Production component This WIRELESS production should contain the following items: 1. One piece of CardBus or PCI adapter MIMO WIRELESS LAN Car

- 19 - AirLive MIMO-G Wireless LAN Adapter User’s Manual

4-3 Profile Page Profile can book keeping your favorite wireless setting among your home, office, and other public hotspot. You may save multiple pro

4-4 Link Status Page Show the information of linking status. As show in picture 20, the description of each session is said as following: 1. Sta

4-5 Statistics Page Statistics page displays the detail counter information based on 802.11 MIB counters. This page translates that MIB counters into

Advance Page The advance setting is shown as follows. The description of each session is said as following: 1. Wireless mode: Select wireless mo

4-6 About Page About page display the wireless card and driver version information shown as follow figure . 1. Connect to AirLive website: www.

Chapter 5 Example 5-1 Adding profile in site survey page 1. Select the indented network from site survey list. 2. Click ADD PROFILE. 3. System w

4. Change profile Name from PROF1 to FAVORITE. 5. Click OK without changing other value. - 26 - AirLive

- 27 - AirLive MIMO-G Wireless LAN Adapter User’s Manual

5-2 Add profile in profile page 1. Click ADD in profile page 2. Add Profile page will pop up 3. Change profile name to TEST.

FCC RF Radiation Exposure Statement: 1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

4. Pull down SSID and select one intended AP. The AP list is the result of last site survey. 5. Set Power Saving Mode.

6. Click Authentication & Security page 7. Click OK. Then we can find the profile name appears in the grid.

8. Click ACTIVATE. Activate the profile setting. - 31 - AirLive MIMO-G Wireless LAN Adapter User’s Ma

5-3 WEP encryption 1. Select AP with WEP encryption. 2. Click CONNECT or doucle click intended network. 3. Authentication & Security pa

4. Enter 0123456789 at Key#1 which is same as our intended AP’s setting. 5. Click OK. The result will look like the below figure.

- 34 - AirLive MIMO-G Wireless LAN Adapter User’s Manual

5-4 Configure connection with WPA-PSK 1. Select the AP with WPA-PSK authentication mode. 2. Click CONNECT or double click the intended network.

*If AP setup security to 〝Both 〞(TKIP + AES), system define is AES that security is severely. 4. Authentication Type is WPA-PSK. Select correct

can be connected, but you won’t be able to exchange any data frames. - 37 - AirLive MIMO-G Wireless LAN

5-5 Configure connection with WPA2-PSK 1. Select the AP with WPA2-PSK authentication mode. 2. Click CONNECT or double click the intended networ

Contents Chapter 1 System Requirements___________________________ 5 1-1 Hardware _______________________________________________________________ 5 1-

support. *If AP setup security to 〝Both 〞(TKIP + AES), system define is AES that security is severely. 4. Authentication Type is WPA-PSK. Select

can be connected, but you won’t be able to exchange any data frames. - 40 - AirLive MIMO-G Wireless LA

5-6 Configure connection with WPA by 802.1x setting 1. Select A.P with WPA authentication mode. 2. Click CONNECT or double click the intended n

support. *If AP setup security to 〝Both 〞(TKIP + AES), system define is AES that security is severely. 4. Click 802.1x setting. 5. 802.1x setti

6. Authentication type and setting method: 1. PEAP: i. Authentication type chooses PEAP, key identity into wpatest2. Protocol chooses EAP-M

ii. Click OK. The result will look like the below figure. 2. TLS / Smart Card: - 44 - AirLive MIMO-G W

i. Authentication type chooses TLS / Smart Card, TLS only need identity that is wpatest2 for server authentication. ii. TLS must use client certic

iv. Display certicate information in use client certicate page. v. Click OK. The result will look like the below figure.

3. TTLS: i. Authentication type chooses TTLS, identity is wpatest2. Protocol chooses CHAP for tunnel authentication, tunnel identity is wpatest2

ii. Click OK. The result will look like the below figure. - 48 - AirLive MIMO-G Wireless LAN Adapter U

5-5 Configure connection with WPA2-PSK ___________________________________ 38 5-6 Configure connection with WPA by 802.1x setting____________________

4. MD5: i. Authentication type chooses MD5, MD5 only need identity and password that are wpatest2 and test2 for server authentication. ii. Click

5-7 Configure connection with WPA2 by 802.1x setting 1. Select A.P with WPA2 authentication mode. 2. Click CONNECT or double click the intended

support. *If AP setup security to 〝Both 〞(TKIP + AES), system define is AES that security is severely. 4. Click 802.1x setting. 5. 802.1x setti

6. Authentication type and setting method: 1. PEAP: i. Authentication type chooses PEAP, key identity into wpatest2. Protocol chooses EAP-MSC

ii. Click OK. The result will look like the below figure. 2. TLS / Smart Card: - 53 - AirLive MIMO-G W

i. Authentication type chooses TLS / Smart Card, TLS only need identity that is wpatest2 for server authentication. ii. TLS must use client certic

iv. Display certicate information in use client certicate page. v. Click OK. The result will look like the below figure.

3. TTLS: i. Authentication type chooses TTLS, identity is wpatest2. Protocol chooses CHAP for tunnel authentication, tunnel identity is wpatest2 a

4. MD5: i. Authentication type chooses MD5, MD5 only need identity and password that are wpatest2 and test2 for server authentication.

ii. Click OK. The result will look like the below figure. - 58 - AirLive MIMO-G Wireless LAN Adapter Us

Chapter 1 System Requirements Before installing the adapter and related software, make sure the computer system meets the minimum requirements descri

Chapter 2 Install Driver for Windows Series This section describes the installation of the 11B/G MIMO WIRELESS LAN Card driver for the Windows98/ME/

Step 3: After installing the driver, you can check if your device is active in the device management as follows

Chapter 3 Configure MIMO WIRELESS LAN Card This chapter will show you how to configure your MIMO WIRELESS LAN Card by using utility in the Product CD