ARM-201E / 204E Wired ADSL2/2+ 1 / 4 Ports Modem Router User’s Manual
Four-Port ADSL Router Back Panel (ARM-204E) Descriptions of All Connectors PWR Connect with power adapter 1X Connect with Ethernet Cable to Switch
Chapter 3: Connecting ADSL2+ Router via Ethernet You can connect ADSL2+ router with PC through either Ethernet cable. After connection is establi
Option1: Get an IP from Router Automatically Select the IP Address tab. In this page, click Obtain an IP address automatically radio button. 1) Se
2) Then, select DNS Configuration tab and select Disable DNS then click OK to finish the configuration. Option2: Configure IP Manually 1) At IP Ad
2) Select Gateway tab and add default Router IP Address “192.168.2.1” in the New gateway field and click Add. Under DNS Configuration tab, select Ena
For Windows 2000 Step 1: (a) Right-click My Network Places and select Properties in the main window screen (b) Or, go to Start / Settings / Control
Step 3: Select Internet Protocol (TCP/IP) then click Properties: Configure IP Automatically: Step 4: Select Obtain an IP address automatically a
Configure IP Manually: Step 4: Select Use the following IP address and Use the following DNS server addresses. IP address: Fill in I
For Windows XP Step 1: Click Start then select Control Panel (in the Classic View). Step 2: Double-click Network Connections icon. 17 Ai
Step 3: Right-click Local Area Connection (local network your ADSL hooked up with) and select Properties: Step 4: Select Internet Protocol (TCP/IP)
1 AirLive ARM-201E / 204E User’s Manual Copyright Copyright 2009 by this company. All rights reserved. No part of this publication may be reproduc
Configure IP address Automatically: Step 5: Select Obtain an IP address automatically and Obtain DNS server address automatically. Click OK to fini
Preferred DNS server: Fill in preferred DNS server IP address. Alternate DNS server: Fill in alternate DNS server IP address. You can use ping
Step 2: Double-click Network and Sharing Center icon. Step 3: Select “Manage Network connections”. 21 AirLive ARM-201E / 204E User’s Manual
Step 4: Right-click Local Area Connection (local network your ADSL hooked up with) and select Properties: Step 5: Select Internet Protocol (TCP/IP)
Configure IP address Automatically: Step 6: Select Obtain an IP address automatically and Obtain DNS server address automatically. Click OK to fini
IP address: Fill in IP address 192.168.2.x (x is a number between 2 to 254). Subnet mask: Default value is 255.255.255.0. Default gateway: De
After you enter User ID and Password, the main webpage will show as below: 25 AirLive ARM-201E / 204E User’s Manual
Chapter 4: Configure ADSL2+ Router via HTML Interface ADSL2+ Router supports a Web-based (HTML) GUI to allow users to configure Router setting via Web
4.2 Quick Start Click Quick Start to guide you to configure the device to connect your ISP and have Internet access within minutes. This Quick St
. The Quick Start Setup Wizard includes four quick steps: 1) Set your new password. 2) Choose your time zone. 3) Set your Internet connection. 4) R
Table of Contents CHAPTER 1: INTRODUCTION ...
4.3 Interface Setup Click an Interface Setup link to set ATM VC values, ISP Encapsulation, configure multi- connection settings, and LAN configur
ATM QoS: Select the Quality of Service types for this Virtual Circuit. The ATM QoS types include CBR(Constant Bit Rate), VBR(Variable Bit Rate) and UB
31 AirLive ARM-201E / 204E User’s Manual PPPoA/PPPoE: Select this option if your ISP requires you to use a PPPoE connection. This option is typically
[NAT] NAT: Select this option to Activate/Deactivated the NAT (Network Address Translation) function for this VC. The NAT function can be activated
[Multicast] IGMP (Internet Group Multicast Protocol): It is a session-layer protocol used to establish membership in a multicast group. The ADSL suppo
Multicast: IGMP (Internet Group Multicast Protocol) is a session-layer protocol used to establish membership in a multicast group. The ADSL router sup
4.4 Advanced Setup 4.4.1 Firewall User can enable or disable firewall feature of the ADSL router in the page. 4.4.2 Routing This table lists
Destination IP Address: This parameter specifies the IP network address of the final destination. IP Subnet Mask: Enter the subnet mask for this dest
Virtual Circuit (VC): The Virtual Circuit (VC) properties of the ATM VC interface identify a unique path that your ADSL/Ethernet router uses to commu
[Virtual Server] The Virtual Server is the server or server(s) behind NAT (on the LAN), for example, Web server or FTP server, that you can make visi
3 AirLive ARM-201E / 204E User’s Manual 4.6.5 Diagnostic ...
4.4.4 QoS [QoS (Quality of Service)] This option will provide better service of selected network traffic over various technologies. Deploying QoS mana
4.4.5 ADSL Select this option to set ADSL Mode and ADSL Type information. ADSL Mode: You can set your ADSL mode in this section. The option has Aut
4.5 Access Management 4.5.1 ACL Go to Access Management ACL to enable remote management. You may use telnet or Web to remotely manage the ADSL R
[Note] 1. You must set one ACL index to access your router via LAN interface. If you don’t, your router cannot access other listed IP Address. (Ref
Filter Type: You can select IP/MAC Filter, Application, and URL Filter type. IP/MAC Filter Set Index: The IP/MAC Filter Set Index from 1 to 12 and e
Destination IP Address: Enter the destination IP address that you wish to deny access to your system. Subnet Mask: Enter the subnet mask of the destin
Please follow below steps to set your IP Filter: 1. IP Filter Set Editing: Choose your IP Filter Set Index, Interface and Direction options. Rememb
UPnP (Universal Plug and Play): You can choose “Activated” or “Deactivated” option from this session. Auto-Configured (by UPnP Application): UPnP netw
Dynamic DNS: Choose the option for Activated or Deactivated DDNS. Service Provider: The default Dynamic DNS service provider is www.dyndns.org. My Ho
48 AirLive ARM-201E / 204E User’s Manual
Chapter 1: Introduction 1.1 Introduction to this ADSL2+ router NOTE: Throughout this manual, some operation illustrations are based on ARM-201E. T
4.6 Maintenance 4.6.1 Administration There is only one account that can access Web-Management interface-Administration. Admin has read/write acces
Current Date/Time: This field displays an updated Date and Time when you reenter this menu. [Time Synchronization] Synchronize time with: You can ch
4.6.4 System Restart The SysRestart screen allows you to restart your router with either its current settings still in place or the factory defaul
4.7 Status 4.7.1 Device Info The Device Info screen is a tool that you use to monitor your ADSL Router. It shows the Firmware Version, WAN, LAN,
53 AirLive ARM-201E / 204E User’s Manual [LAN] IP Address: The LAN port IP address Subnet Mask: The LAN port IP subnet mask. DHCP Server: The status
4.7.2 System Log The System Log displays data generated or acquired by routine system communication with other devices, such as the results of negoti
4.7.3 Statistic The ADSL Router keeps statistic of traffic that passes through it. You are able to view the amount of packets that passes through th
Chapter 5: Troubleshooting If the router is not function properly, first check this session for simple troubleshooting before contacting your Internet
57 AirLive ARM-201E / 204E User’s Manual 5.2 Problems with the Web Interface I cannot access the web Interface. STEPS CORRECTIVE ACTION 1 Make
5.4 Problems with LAN Interface I cannot access the router from the LAN or ping any computer on the LAN. STEPS CORRECTIVE ACTION 1 Check the Eth
5 AirLive ARM-201E / 204E User’s Manual Setup Wizard Supports Setup Wizard Web GUI to install this ADSL router easily and quickly. Multi-conne
59 AirLive ARM-201E / 204E User’s Manual 5.6 Problems with the Internet Access I cannot access the Internet. STEPS CORRECTIVE ACTION 1 Make sur
10/100M Auto-negotiation Fast Ethernet switch This auto-negotiation feature allows the router to detect the speed of incoming transmissions and ad
Chapter 2: Hardware Installation 2.1 Package Contents ADSL Ethernet Router RJ-45 Ethernet cable RJ-11 Phone cable Po
Four-Port ADSL Router Front Panel (ARM-204E) Descriptions of LED status PWR When an active power a
Kommentare zu diesen Handbüchern