AirLive WN-5000R Bedienungsanleitung

AirLive WN-5000R User’s Manual 0 WN-5000R 802.11n Wireless Router User’s Manual

1-4 Package Contents Before you starting to use this router, please check if there’s anything missing in the package, and contact your dealer of purc

3-6 Firmware Upgrade The system software used by this router is called as ‘firmware’, just like any applications on your computer, when you replace t

After a firmware upgrade file is selected, click ‘Apply’ button, and the router will start firmware upgrade procedure automatically. The procedure may

WN-5000R User’s Manual 99 Chapter 4: Appendix 4-1 Hardware Specification CPU: Ralink

WN-5000R User’s Manual 100 4-2 Troubleshooting If you found the router is working improperly or stop responding to you, don’t panic! Before you conta

WN-5000R User’s Manual 101 check DNS setting. I can’t locate my router by my wireless cli

WN-5000R User’s Manual 102 4-3 Glossary Default Gateway (Router): Every non-router IP device needs to configure a default gateway’s IP address. When

WN-5000R User’s Manual 103 For example, if the IP address for a device is, in its binary

WN-5000R User’s Manual 104 PPTP TCP 1723 PC Anywhere TCP 5631 PC Anywhere UDP 5632 PPPoE: Point-to-Point Protocol over Ethernet. Point-to-Point Pr

1-5 Familiar with your new wireless broadband router Front Panel LED Name Light Status Description PWR ON Router is switched on and correctly

Back Panel Item Name Description Antenna A to C Antenna A, B, and C Power Power connector, connects to A/C power adapter Reset / WPS Reset the

Chapter 2: System and Network Setup 2-1 Build network connection Please follow the following instruction to build the network connection between

2-2 Connecting to wireless broadband router by web browser After the network connection is built, the next step you should do is setup the router wi

2. Select ‘Obtain an IP address from a DHCP server’, then click ‘OK’. 2-2-2 Windows 2000 IP address setup: 1. Click ‘Start’ button (it should

2. Select ‘Obtain an IP address automatically’ and ‘Obtain DNS server address automatically’, then click ‘OK’.

2-2-3 Windows XP IP address setup: 1. Click ‘Start’ button (it should be located at lower-left corner of your computer), then click control panel.

2. Select ‘Obtain an IP address automatically’ and ‘Obtain DNS server address automatically’, then click ‘OK’.

2-2-4 Windows Vista IP address setup: 1. Click ‘Start’ button (it should be located at lower-left corner of your computer), then click control pane

Declaration of ConformityWe, Manufacturer/ImporterDeclare that the product802.11n Wireless RouterWN-5000Ris in conformity withIn accordance with 89/33

2. Select ‘Obtain an IP address automatically’ and ‘Obtain DNS server address automatically’, then click ‘OK’.

2-2-5 Router IP address lookup After the IP address setup is complete, please click ‘start’ -> ‘run’ at the bottom-lower corner of your desktop:

3. Connect the router’s management interface by web browser NOTE: If the IP address of Gateway is not displayed, or the address followed by ‘IP

NOTE: If you can’t see the web management interface, and you’re being prompted to input user name and password again, it means you didn’t input user

2-3 Using ‘Quick Setup’ This router provides a ‘Quick Setup’ procedure, which will help you to complete all required settings you need to access the

Address (2): here Daylight If the country you live uses daylight saving, Savings(3): please check ‘Enable Function’ box, and choose th

If you’re not sure, please contact your Internet service provider. A wrong Internet connection type will cause connection problem, and you will not be

2-3-2 Setup procedure for ‘Fixed-IP xDSL’: 1 2 3 4 5 Here are descriptions of every setup items: IP address Please input IP address assigne

2-3-3 Setup procedure for ‘PPPoE xDSL’: 1 2 4 5 6 3 7 Here are descriptions of every setup items: User Name (1): Please input user name assigne

MTU - Please use default value if you don’t know what it is, or ask your service provider for a proper value. Connection Type - There are 3 option

WN-5000R CE Declaration StatementCountry Declaration Country DeclarationcsČesky [Czech]OvisLink Corp. tímto prohlašuje, že tento WN-5000R je ve shodě

Now please go to PPTP settings section: 123 4 5 6 7 8 Here are descriptions of every setup items: User ID (1): Please input user ID (user name) a

2-3-5 Setup procedure for ‘L2TP xDSL’: L2TP is another popular connection method for xDSL and other Internet connection types, and all required setti

User ID (1): Please input user ID (user name) assigned by your Internet service provider here. Password (2): Please input the pas

Password (2): Please input the password assigned by Telstra. User device login Check this box to choose login server manually (3): server by

Press ‘Continue’ to save the settings made and back to web management interface; press ‘Apply’ to save the settings made and restart the router so t

New Password (2): Please input new password here. Confirmed Please input new password here again. Password (3): When you finish, click ‘

Please use new password to enter web management interface again, and you should be able to login with new password. 2-4-3 Remote Management This r

NOTE: Default port number the web browser will use is ‘80’. If the ‘Port’ setting in this page is not ‘80’, you have to assign the port number in the

2-5 Setup Internet Connection (WAN Setup) Internet connections setup can be done by using ‘Quick Setup’ menu described in chapter 2-3. However, you c

2-5-1 Setup procedure for ‘Dynamic IP’: 1 2 3 Here are descriptions of every setup items: Host Name (1): Please input host name of your compute

WN-5000R User’s Manual 1 Federal Communication Commission Interference Statement This equ

2-5-2 Setup procedure for ‘Static IP’: 1 2 3 4 Here are descriptions of every setup items: IP address assigned Please input IP address assigned

2-5-3 Setup procedure for ‘PPPoE’: 1 2 34 567 User Name (1): Please input user name assigned by your Internet service provider here. Password (

2-5-4 Setup procedure for ‘PPTP’: PPTP requires two kinds of setting: WAN interface setting (setup IP address) and PPTP setting (PPTP user name and p

Password (2): Please input the password assigned by your Internet service provider here. PPTP Gateway (3): Please input the IP address of PPTP

2-5-5 Setup procedure for ‘L2TP’: 1 2 4 56 3 Here are descriptions of every setup items: User ID (1): Please input user ID (user name) assigned

2-5-6 Setup procedure for ‘Telstra Big Pond’: 1 2 3 4 5 This setting only works when you’re using Telstra big pond’s network service in Australia.

2-5-7 Setup procedure for ‘DNS’: If you select ‘Dynamic IP’ or ‘PPPoE’ as Internet connection method, at least one DNS server’s IP address should be

2-5-8 Setup procedure for ‘DDNS’: DDNS (Dynamic DNS) is a IP-to-Hostname mapping service for those Internet users who don’t have a static (fixed) IP

2-6 Wired LAN Configuration Before all computers using wired Ethernet connection (i.e. those computers connect to this router’s LAN port 1 to 4 by Et

Please follow the following instructions to set wired LAN parameters: Please click ‘LAN’ menu on the left of web management interface, there are thre

WN-5000R User’s Manual 2 Table of Contents Chapter 1: Product Information ...5 1-1 Intr

2-6-2 DHCP Server: 1 3 2 4 These settings are only available when ‘DHCP Server’ in ‘LAN IP’ section is ‘Enabled’, and here are descriptions of ever

2-6-3 Static DHCP Leases Table: This function allows you to assign a static IP address to a specific computer forever, so you don’t have to set the I

WN-5000R User’s Manual 49 mapping (1), then click ‘Delete Selected’ button (2); if you wa

2-7 Wireless LAN Configuration If your computer, PDA, game console, or other network devices which is equipped with wireless network interface, you c

12 3 4 5 This wireless router can be work in 4 modes: a. AP: Standard wireless AP (access point). b. AP Bridge-Point to Point: Connect this rou

2-7-1-1 Setup procedure for ‘AP’: Please select the radio band you want to use from ‘Band’ dropdown menu (2), and the following message will be displ

numbers are 1 to 13. You can choose any channel number you want to use, and almost all wireless clients can locate the channel you’re using automatica

NOTE: Two wireless routers must use the same mode, band, channel number, and security setting! Here are descriptions of every setup items: Band (

Band (2) Select the band you want to use, two wireless routers must use the same setting. Channel Select the channel you want to use, two wireless

ESSID (3) Input the ESSID of your wireless router, it can be the same with other wireless routers for the convenience of roaming, or different with o

WN-5000R User’s Manual 3 2-6-3 Static DHCP Leases Table: ...

Here are descriptions of every setup items: Fragment Set the Fragment threshold of wireless radio. Threshold: Do not modify default value if

WN-5000R User’s Manual 58 Tx Power: You can set the output power of wireless radio. Unless you’re using this wireless router in a really big space,

2-7-3 Wireless Security It’s very important to set wireless security settings properly! If you don’t, hackers and malicious users can reach your netw

Key Length (2): There are two types of WEP key length: 64-bit and 128-bit. Using ‘128-bit’ is safer than ’64-bit’, but will reduce some data trans

2-7-3-3 Wi-Fi Protected Access (WPA): When you select this mode, the wireless router will use WPA encryption, and the following se

Key Format (3): can select Passphrase (8 or more alphanumerical characters, up to 63), or Hex (64 characters of 0-9, and a-f). Pre-shared P

2-7-4 Wireless Access Control This function will help you to prevent unauthorized users from connecting to your wireless router; only those wireless

required. (i.e. If the MAC address label of your wireless device indicates ‘aa-bb-cc-dd-ee-ff’ or ‘aa:bb:cc:dd:ee:ff’, just input ‘aabbccddeeff’. Com

2-7-5 Wi-Fi Protected Setup (WPS) Wi-Fi Protected Setup (WPS) is the simplest way to build connection between wireless network clients and this wirel

(2) WPS Status: If the wireless security (encryption) function of this wireless router is properly set, you’ll see ‘Configured

WN-5000R User’s Manual 4 3-4-5 Security Log...

WN-5000R User’s Manual 67 2-7-6 Security Tips for Wireless Network Here are some quick t

Chapter 3: Advanced Functions 3-1 Quality of Service (QoS) Quality of service provides an efficient way for computers on the network to share the

Bandwidth (2): bandwidth in kbits. To disable download bandwidth limitation, input ‘0’ here. Total Upload You can set the limit of total uplo

a b c d e f g h Here are descriptions of every setup items: iRule Name (a): Please give a name to this QoS rule (up to 15 alphanumerical charact

Range (f): port number that will be affected by this rule. If you want to apply this rule on port 80 to 90, please input ’80-90’; if you want to appl

3-2 Network Address Trnaslation (NAT) Network address translations solve the problem if sharing a single IP address to multiple computers. Without NA

3-2-2 Port Forwarding This function allows you to redirect a single port or consecutive ports of Internet IP address to the same port of the IP addre

Reset (7): Remove all inputted values. Port Forwarding All existing port forwarding mappings will Table (8): be displayed here. ‘Delete

3-2-3 Virtual Server This function allows you to redirect a port on Internet IP address (on WAN port) to a specified port of an IP address on local n

Add (7): Add the mapping to virtual server table. Reset (8): Remove all inputted values. Virtual Server All existing virtual server

WN-5000R User’s Manual 5 Chapter 1: Product Information 1-1 Introduction and safety inf

3-2-4 Port Mapping for Special Applications Some applications require more than one connection a time; these applications won’t work with simple NAT

There are many applications listed here. Please check the box of the special support for applications you need, and then click ‘Apply’ button.

3-3 Firewall Excepting NAT, this router also provides firewall function to block malicious intruders from accessing your computers on local network.

3-3-1 Access Control This function allows or denies computers with specific MAC address from connecting to the network; it can also allow or deny com

Computer’ or anything. You can input up to 16 alphanumerical characters here. This is optional and you can leave it blank, however, it’s recommended t

WN-5000R User’s Manual 82 After you finish with all settings, please click ‘Apply’ (15) button, then Please press Apply.

3-3-1-1 Add PC After button is clicked, the following message will be displayed on your web browser: a b c d e Here are descriptions of every setu

address (b): field, and input the end IP address in the right field to define a range of IP addresses, or just input the IP address in the left fie

1 2 3 4 5 9 6 7 8 Here are descriptions of every setup items: Enable URL Check this box to enforce URL Blocking, Blocking (1): uncheck it

3-3-3 DoS Attack Prevention Denial of Service (DoS) is a common attack measure, by transmitting a great amount of data or request to your Internet IP

WN-5000R User’s Manual 6 1-2 Safety Information In order to keep the safety of users and your properties, please follow the following safety instruct

information by doing so. Check this box and the router will block all traffics which are trying to scan your Internet IP address. Sync Flood (4):

3-3-3-1 DoS - Advanced Settings When you click ‘Advanced’ button in DoS menu, the following message will be displayed on your web browser: a b c d e

3-3-4 Demilitarized Zone (DMZ) Demilitarized Zone (DMZ) refers to a special area in your local network. This area resides in local network, and all c

Current All existing public IP address and private IP DMZ table (6): address mapping will be displayed here. Delete If you w

3-4 System Status The functions described here will provide you with system related information. To enter system status menu, please either click ‘St

This information will vary depending on the connection status. 3-4-3 Device Status You can use this function to know the status of your router. P

Please click ‘System Log’ menu on the left of web management interface, and the following message will be displayed on your web browser: 1 2 3 The

The system events will be displayed in this page, and here are descriptions of every buttons: Save (1): Save current event log to a text file.

You can click ‘Refresh’ button to display latest information. WN-5000R User’s Manual

3-5 Configuration Backup and Restore You can backup all configurations of this router to a file, so you can make several copied of router configurati