Airlive WL-2000CAM Bedienungsanleitung PDF herunterladen (Seite 21)

AirLive WL-2000CAM User’s Manual

6-1-3 Network

6-1-3-1 Information

MAC address：Display the MAC address of the device.

Obtain an IP address automatically (DHCP)：If a DHCP server is installed on the network, to select this while

the IP address is assigned by the DHCP server.

Note：

• When you set Obtain an IP address automatically (DHCP), make sure that the DHCP server is

working on the network.

Use the following IP address：Select this when a fixed IP address is set.

IP address：Enter the IP address of the device.

Subnet mask：Enter the subnet mask.

Default gateway：Enter the default gateway.

Use the following DNS server address：Select this when you set the fixed address as the IP address of DNS

server.

Primary DNS server：Enter the IP address of the primary DNS server.

Secondary DNS server：Enter the IP address of the secondary DNS server, if necessary.

HTTP port number：Select 80 in general situations. If you want to use a port number other than 80, select the

text box and enter a port number between 1024 and 65535.

Note：

• When you have set the HTTP port number to a number other than 80 on the Network setting page or in

the Setup Program, access the device by typing the IP address of the device on the web browser as

follows:

Example: when HTTP port number is set to 2000  http://192.168.1.100:2000/

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 42 43

Keine Kommentare

Airlive WL-2000CAM Bedienungsanleitung Seite 21