Airlive WL-2000CAM Bedienungsanleitung Seite 15

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 43
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 14
AirLive WL-2000CAM Users Manual
12
Current date & timeThis displays the current date and time of the device.
PC clockThis displays the date and time of the monitoring PC clock.
Date & time formatClick the pull-down box to select among different time display formats, including
yyyy-mm-dd hh:mm:ss (year-month-day hour:minute:second), mm-dd-yyyy hh:mm:ss (month-day-year
hour:minute:second), and dd-mm-yyyy hh:mm:ss (day-month-year hour:minute:second).
AdjustSelect one of four time adjusting modes.
Keep current settingSelect this mode to keep the current date and time of the device.
Synchronize with PCSelect this mode to make the date and time of the device the same as the monitoring
PC.
Manual settingSelect this mode to manually adjust the date & time of the device.
Synchronize with NTPSpecify the NTP server name and the Refresh Interval to synchronize the date and
time of the device with those of the time server, known as the NTP (Network Time Protocol) server.
Note:
The NTP server (Network Time Protocol) is the time server which is an Internet standard protocol (built
on top of TCP/IP) that assures accurate synchronization to the millisecond of computer clock times in a
network of computers.
NTP server nameType the host name or IP address of the NTP server, up to 64 characters.
Time zoneSelect the time zone and time difference from Greenwich Mean Time in the area where the device is
installed from the pull-down box.
Initialize
RebootClick this button to reboot the device. A confirmation dialogue will appear. Click OK to proceed. It takes
about two minutes to reboot the device.
Factory defaultClick this button to reset the device to the factory default settings. A confirmation dialogue will
appear. Click OK to proceed; the network indicator on the device will start to blink. After completing adjustments
to the default settings, the device will reboot automatically. Do not turn off the device until the device reboots.
Backup setting dataSave the setting data of the device to a file. Click Save, and follow the instructions on the
Seitenansicht 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 42 43

Kommentare zu diesen Handbüchern

Keine Kommentare