Airlive FE-200DM Bedienungsanleitung

AirLive FE-200DM Manual 1FE-200DM 2-MegaPixel Ceiling Mount Fish Eye PoE IPCAM User’s

1. Introduction AirLive FE-200DM Manual 4 6. Power Jack: The input power is DC 12V, 2A. Note: ONLY use package power adapter supplied with the in

1. Introduction AirLive FE-200DM Manual 511. GPIO: The 7 pin terminal block includes 4 input ports and 1 output ports. 1.4 Mounting the Camera F

1. Introduction AirLive FE-200DM Manual 63. Connect the network cable into the camera, and then mount the camera onto the stand. 4. Rotate the cam

2. Preparation AirLive FE-200DM Manual 72 2. Preparation 2.1 Search and Set up by IPWizard II When you installed the Camera on a LAN environ

2. Preparation AirLive FE-200DM Manual 8 2.2 UPnP of Windows® XP, Vista or 7 UPnP™ is short for Universal Plug and Play, which is a networking

2. Preparation AirLive FE-200DM Manual 9 Click the targeted Device. Then Internet Explorer will connect to this Network Camera automatica

2. Preparation AirLive FE-200DM Manual 10(1) Enable UPnP option of your NAT router To use UPnP IGD function (NAT traversal), you need to make

2. Preparation AirLive FE-200DM Manual 112. Type in your login name and password under “USERNAME” and “PASSWORD” textbox. For the first ti

3. Operating the Network Camera AirLive FE-200DM Manual 123 3. Operating the Network Camera Start-up screen will be as follow no matter an ordi

3. Operating the Network Camera AirLive FE-200DM Manual 13Protocol User can select proper streaming protocol according to networking environme

Copyright and Disclaimer AirLive FE-200DM Manual i Owner's Record The mode

3. Operating the Network Camera AirLive FE-200DM Manual 14z Quad view & Quad with source view PTZ control panel: 1. Ch：Select the channel

3. Operating the Network Camera AirLive FE-200DM Manual 15Volume Click Speaker button to activate this function. Scroll the control bars

4. Administrating the Device AirLive FE-200DM Manual 164 4. Administrating the Device System Setting This function is only available for a user

4. Administrating the Device AirLive FE-200DM Manual 174.1.2 Advanced z Stream Setting Note: Configuration of stream 2 is the same as strea

4. Administrating the Device AirLive FE-200DM Manual 18z Image Format H.264 and MJPEG are available for image format selection. The term, “i

4. Administrating the Device AirLive FE-200DM Manual 194.2 Camera: Adjust Camera Parameters Use this menu to set the functions of the camera p

4. Administrating the Device AirLive FE-200DM Manual 20 z Audio Setting: Audio Enable: Turn on/off the audio. z Web Record Setting: Save Pat

4. Administrating the Device AirLive FE-200DM Manual 214.2.2 Advanced z White balance: Adjustment to compensate for different environment

4. Administrating the Device AirLive FE-200DM Manual 22z Infrared (IR) Cut Filter: The default is automatically switched according to the lig

4. Administrating the Device AirLive FE-200DM Manual 23(3) Quad with source view: (4) Triple view: 2. Ceiling Mount:

Copyright and Disclaimer AirLive FE-200DM Manual iiFor customers in the U.S.A. This equipment has been tested and found to comply with the

4. Administrating the Device AirLive FE-200DM Manual 24(2.) Broad view: (3.) Quad view: (4.) Quad with source view:

4. Administrating the Device AirLive FE-200DM Manual 25(6.) Triple view: 3. Table Mount: For Choosing Table mount, go back to live vie

4. Administrating the Device AirLive FE-200DM Manual 264. 720P Wall Mount: For Choosing 720P Wall Mount type, go back to Live view. There are

4. Administrating the Device AirLive FE-200DM Manual 274.3 Event 4.3.1 Event Server Add FTP Server: Click on the “Add FTP” to expand FTP s

4. Administrating the Device AirLive FE-200DM Manual 28Remove: Click “Remove” to delete selected event servers. 4.3.2 Motion Detection z To

4. Administrating the Device AirLive FE-200DM Manual 291. Click on “Add” to set up a detection area. (Setup panel will be expanded) 2. Give

4. Administrating the Device AirLive FE-200DM Manual 30 Note: 1. Maximum number of detection window is 10. 2. Motion Detection windows need to

4. Administrating the Device AirLive FE-200DM Manual 314.3.4 Event Configuration 1. To add an event trigger, click on “Add” and the setup

4. Administrating the Device AirLive FE-200DM Manual 32 4.4.2 Storage Display the storage information, including disk size info, type and sta

4. Administrating the Device AirLive FE-200DM Manual 33 z DHCP Service: Stand for Dynamic Host Configuration Protocol. Enable this checked

Copyright and Disclaimer AirLive FE-200DM Manual iiiNOTICE TO USERS © 2006~11 A

4. Administrating the Device AirLive FE-200DM Manual 34The device can directly connect to the xDSL. However, it should be setuped on a LAN envir

4. Administrating the Device AirLive FE-200DM Manual 35z UPnP: Enable UPnP, so that the device can be discovered in an UPnP Compliant Networ

4. Administrating the Device AirLive FE-200DM Manual 36 4.6 System 4.6.1 Information Lists - System and Network configurations. z Firmware V

4. Administrating the Device AirLive FE-200DM Manual 374.6.2 User Use this menu to add, update, or remove the usernames and passwords of the A

4. Administrating the Device AirLive FE-200DM Manual 38Click this option to enable time synchronization with computer time. z Synchronize with

4. Administrating the Device AirLive FE-200DM Manual 39z Factory Default (Including Network setting): Recall the device hard factory defaul

4. Administrating the Device AirLive FE-200DM Manual 40z Backup Setting: To take a backup of all of the parameters, click this button. If

4. Administrating the Device AirLive FE-200DM Manual 41z Use Default Look: The default layout of live/configuration pages. Use Defined Link

5. Appendix AirLive FE-200DM Manual 425 5. Appendix Appendix A: Restore Factory Default In some cases, system does not respond to any operation

5. Appendix AirLive FE-200DM Manual 43Appendix B: Alarm I/O Connector This Network Camera provides a general I/O terminal block as below: Pin

Table of Contents i AirLive FE-200DM Manual Table of Contents 1. Introduction...

5. Appendix AirLive FE-200DM Manual 44 Application 2 Appendix C: Troubleshooting & Frequently Asked Questions Question Answer or Resolut

5. Appendix AirLive FE-200DM Manual 45The device can be used outdoors or not. The device is not weatherproof. It needs to be equipped with

5. Appendix AirLive FE-200DM Manual 46setup program. Disable the firewall of the antivirus software during setting up this device. • Check

5. Appendix AirLive FE-200DM Manual 47private IP address on the LAN. • Make sure the http port used by the Network Camera, default=80, is forw

5. Appendix AirLive FE-200DM Manual 48your computer Control”. The status column should show “Installed”. If the file is not listed, make s

5. Appendix AirLive FE-200DM Manual 49is enabled. streamed image size. Try reducing the video streaming size to 160x120 or 320x240 and

5. Appendix AirLive FE-200DM Manual 50around the camera brighter or turn the White-light LED on. Miscellaneous Can not play the recorded ASF fil

5. Appendix AirLive FE-200DM Manual 51Appendix E: Bandwidth Estimation The frame rate of video transmitted from the device depends on connecti

5. Appendix AirLive FE-200DM Manual 52IP Module Video Video Encoder H.264, Motion JPEG Frame Rate 4:3 Res. @ 15 FPS; 16:9 Res. @ 30 FPS

5. Appendix AirLive FE-200DM Manual 53Indication LED Green and orange LEDs Mechanical IR-cut Yes Operating Temperature 0°C to 50°C (32°F to 12

Table of Contents AirLive FE-200DM Manual ii 4.4 Schedule...

5. Appendix AirLive FE-200DM Manual 54If you have cable or DSL service, you will most likely have a dynamically assigned WAN IP Address. ‘Dynam

5. Appendix AirLive FE-200DM Manual 55Virtual Server ports used by the camera must be opened through the router for remote access to your came

5. Appendix AirLive FE-200DM Manual 56Enter valid ports in the Virtual Server section of your router. Please make sure to check the box on th

5. Appendix AirLive FE-200DM Manual 57z Application Steps—DDNS & Domain Name (1). Visit the following web site: http://www.dyndns.org/ (

5. Appendix AirLive FE-200DM Manual 58b. E-mail address and confirmation c. Password and confirmation d. Submit all the input information and fi

5. Appendix AirLive FE-200DM Manual 59(5). Check your e-mail mailbox. There will be an e-mail with a title “Your DynDNS Account Information

5. Appendix AirLive FE-200DM Manual 60(7). If the correct username and password are input, you can see the following picture at the top-right of

5. Appendix AirLive FE-200DM Manual 61 (11). We could create a domain name without any charge at this step. First, we input the host name.

5. Appendix AirLive FE-200DM Manual 62z Setup the DDNS and PPPoE of Networked Device At last, users have to enter the web page of Networked Dev

5. Appendix AirLive FE-200DM Manual 63Italy 230V 50 Hz Japan 100V 50/60 Hz* *Eastern Japan 50 Hz (Tokyo, Kawasaki, Sapporo, Yokohoma, and Sen

1. Introduction AirLive FE-200DM Manual 11 1. Introduction 1.1 Overview AirLive FE-200DM is a Fish-Eye Panorama Network Dome Camera featured with

5. Appendix AirLive FE-200DM Manual 64Dialing procedure: 1. Choose a verified player (PacketVideo or Realplayer currently) 2. Use the fo

5. Appendix AirLive FE-200DM Manual 65 Click Add or Remove Programs Click Add/Remove Windows Components

5. Appendix AirLive FE-200DM Manual 66The following screen will appear: Select Networking Services Click Details Select Universal Plug and

5. Appendix AirLive FE-200DM Manual 67 Click Next Please wait while Setup configures the components.

5. Appendix AirLive FE-200DM Manual 68 Click Finish

1. Introduction AirLive FE-200DM Manual 2Features z Panoramic 360 Degrees Full View z H.264 & MJPEG Video Compression z 2 Megapixels Resoluti

1. Introduction AirLive FE-200DM Manual 31.3 Physical Overview and Connections 1. Light Sensor: The Light sensor is for detecting IP Camera env